 |
The Loadblock Plus is a low capacity, self-indicating compression loadcell, used in many testing and load monitoring applications worldwide. The integral display eliminates the need for a separate display or cable assemble that can be easily damaged. Applications include the measurement of loads associated with the testing of hydraulic presses, cylinders or jacks.
This latest version of our Loadblock has advanced features and benefits providing solutions for today’s complicated load test and force monitoring needs. Features include full function push button controls for tare, units of measure (lbs, kg, kN, and tonnes), peak hold, pre-set tare, audible set-point alarm and an overload counter.
This crucial overload alarm counter is a requirement for many safety and quality control departments as it keeps track of overload events allowing the load cell in question to be removed from service immediately following a calibration voiding overload event. The load cell in question can then be sent out for proper testing and if necessary, recalibration before re-entering service.
The advanced microprocessor based electronics provide the Loadblock Plus with high speed read rates (500/sec), extreme resistance to industrial level noise and unprecedented stability.
This high stability provides the Loadblock Plus with 5000 + divisions and the highest standard resolution of any self-indicating compression load cell on the market today.
The unit also features a RS-485 serial output port allowing for remote viewing with either the handheld Plus Digital Display/Controller or Windows PC Desktop controller data logging software.
About
FEATURES
- Large LCD Display
- High Resolution
- Peak Hold
- Compact Size
- Tare
- Preset Tare
- Offset Adjustment
APPLICATIONS
- Pre-lift weight and centre of gravity calculations for large plant and equipment
- Hydraulic ram testing
WARRANTY & ASSURANCE
SUPPLIED WITH THE FOLLOWING AS STANDARD
- 2 year warranty
SUPPLIED WITH THE FOLLOWING AS STANDARD
- Proof test certificate
- Operator Manual
- Carry/Storage Case
 |
 |
The Handheld plus is a rugged and versatile digital handheld display with a broad range of features and is suitable for all Straightpoint load cell products.
At the heart of the ergonomically designed Handheld plus is a powerful PCB providing industry-leading features such as user-selectable units of measure (tonnes, lbs, kg and kN), programmable audible overload alarm (HHP & SW-HHP), peak hold, pre-set tare and a user-resettable (HHP & SW-HHP) overload counter.
This crucial overload alarm counter is a requirement for many safety and quality control departments, as it keeps track of overload events, allowing the load cell in question to be removed from service immediately, following the calibration voiding overload event. The load cell in question can then be sent out for proper testing and, if necessary, recalibration before re-entering service.
The HHP is suitable for connection via cable to any Straightpoint cabled load cell product and easily adapted to any other manufacturers’ load cell product with an mv/v output.
In addition to the standard HHP, the SW-HHP is suitable for connection to any Straightpoint wireless load cell, has a range of up to 1000m/3280ft (ATEX 700m/2300ft) and is supplied as standard with the Radiolink plus load cell.
About
FEATURES
- Overload counter
- User settable 90db audible overload alarm (not ATEX)
- Multiple display units – tonnes, lbs, kg and kN
- 100Hz Peak hold
- Pre-set tare
- Unrivalled Wireless range 1000m/3280ft
- Annual calibration reminder
Handheld plus are the ideal option for the following Straightpoint products:
- Radiolink Plus
- Wireless Load Shackle
- Wireless Compression
- Wirelink Plus
- Miniweigher Plus
- Compression Loadcell
- Shackle Loadcell
- TIMH
- ATEX/IECEX
WARRANTY & ASSURANCE
SUPPLIED WITH THE FOLLOWING AS STANDARD
- 2-year warranty
SUPPLIED WITH THE FOLLOWING AS STANDARD
- AA Batteries
- Operator Manual
The Multi Operation Survey System (MOSS) features six, 4-20 milliamp (mA) inputs that collect information when multiple types of data are required, captured by load cells, thermometers, anemometers and other technologies. The MOSS, boasting USB data storage capability, is typically applied where data needs to be gathered over a period of time, say, when conditions are likely or known to change. Practical, robust, portable measurement solution solving your autonomous monitoring, logging and surveying needs.
Originally designed for the marine industry, where wind speed and sea state might be among variables, the product is provided in an IP67-rated, portable case, mounted on which are the connectors (also IP67 rated) that can be used while the case is closed, offering protection from the elements—even snow and ice. The MOSS has also been successful in construction and infrastructure applications where other demands are placed upon it.
Its adaptable multi-sensor functionality gives you the freedom to develop your own Operation Survey and Monitoring solution utilising load cells and other environmental sensors such as anemometers and temperature or humidity sensors.
FEATURES
The MOSS model supplied in a portable case that provides readout, presentation and storage of (multiple) sensor signals. Based on this rugged case the following components are integrated:
- Visualisation screen with user control buttons.
- Battery supply with status display.
- Long operational time up to 100 hours
- Fast recharge. (optional extended battery pack available)
- On-board and USB memory for data gathering and storage.
- IP67 connectors for external sensors, battery charge and output functionality.
APPLICATIONS
- Motion monitoring
- Environmental monitoring
- Decision support systems
- Heavy Lift
- IRIDIUM tracking
- Offshore installation
- Wind park installation
- Transport tracking
- Tow monitoring
- Fatigue monitoring
- Wreck removal
- Salvage monitoring and survey
- Float-on/off monitoring
APPLICATIONS
- Gloat over monitoring
- Load-out monitoring
- Incline measurement
- Deadweight survey
- Marine survey of damaged vessels
- Floating dock monitoring
- Semi-submersible monitoring
- Dry docking operations
- Tug and bollard pull testing
- Construction overview
- Piling and boring
- Crane and wire rope monitoring
Specifications/Technical Data
MOSS specifications |
Weights and dimensions of MOSS: 305x270x194mm; 4.5kg
Integral Battery life, single sensor @ 1Hz: 24hrs
External Battery packs:
Battery type: Lithium Iron Phosphate (LiFePO4)
40ah Battery pack size: 300x249x119mm; 6kg
Battery life, single sensor @ 1Hz: 5 days
80ah Battery pack size: 361x289x165mm; 10.7kg
Battery life, single sensor @ 1Hz: 12 days
100ah Battery pack size: 411x322x168mm; 13.2kg
Battery life, single sensor @ 1Hz: 15 days
170ah Battery pack size: 462x340x170mm; 22kg
Battery life, single sensor @ 1Hz: 22 days
- Connectivity: 6 x Sensor input
- Status display
- (different modules):
1 x Multi output
1 x USB input/output
1 x Ethernet Charge
1 x input 19-24 Vdc - Display : 3.5 inch, 320x240 pixel
- Software : client specific solutions
- On/Off switch : 1x Power
- LED : 1x
About
The TIMH range is a Wireless Running Line Tensiometer or RLTM built with dockside, marine, offshore, towage and salvage applications in mind. It is particularly useful where there is no anchor or dead end on the line to rig a Straightpoint Radiolink or Loadlink digital dynamometer to measure tension force at speeds up to 20m/min or 65ft/min.
Two versions of the TIMH are available:
- Long-range 2.4GHz version providing industry leading wireless range of 700m or 2300ft to SP's SW-HHP handheld or software options.
- Bluetooth output and can be connected to any smartphone running our free HHP app on iOS or Android at ranges up to 100m or 328ft.
The TIMH is constructed from marine grade stainless steel and is suitable for many wire rope configurations up to 80t and will, as an option, calculate lineout and speed in metres or feet. The TIMH has several mounting points featured in its unique design but if other mounting options are required Straightpoint can provide a custom engineered solution specific to your application.
Available as a wireless or cabled system utilising Straightpoint’s HHP range of handheld displays or SW-MWLC software, this impressive Running Line Dynamometer or RLTM is available to ship from stock, to anywhere in the world within days.
FEATURES
- Measure tension, line speed and distance
- Five wheel design improving accuracy
- Cabled or wireless options
- Easy to install and replace batteries (4 x AA standard Alkaline)
- Fully constructed from corrosion resistant stainless steel
- IP67/NEMA6 Loadpin
- Software available to data log and monitor or analogue output
BENEFITS
APPLICATIONS
- Large range of capacities to 150t and wire rope diameters up to 89mm/3 1/2”
- Line in/out, distance and speed
- Maintenance free heavy duty needle bushes
APPLICATIONS
- Dockside
- Marine
- Offshore
- Towage and Salvage
- Single point mooring
- Spread mooring
- Tenson mooring
- Dynamic positioning
- Wireline Services
WARRANTY & ASSURANCE
SUPPLIED WITH THE FOLLOWING AS STANDARD
- 2 year warranty
- Design validated by F.E.A.
SUPPLIED WITH THE FOLLOWING AS STANDARD
- Proof test certificate
- Operator Manual
- Carry/Storage Crate
